We fix what's broken, fast, and we don't disappear after the invoice. Priority scheduling available across Manhattan and the surrounding zip codes.
Our Manhattan dispatcher asks a few quick questions to gauge urgency and get you the fastest available window.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. We invest in ongoing training so our techs recognize a failing capacitor, a cracked heat exchanger, or a refrigerant leak before it turns into an emergency.
You won't find us buried under layers of call-center scripts — we're the company that tells you what actually needs fixing instead of what pads the ticket. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, big or small.
Manhattan's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Manhattan and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Manhattan is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Manhattan rooftop unit. Our warranty and service history records stay attached to your address, so any future technician who visits already has the full picture.
We cover the full range of heating, cooling, and air quality work Manhattan properties actually need.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Manhattan dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
Once a technician is on-site, the goal is always a same-visit repair — most emergency calls in Manhattan get resolved in a single trip, not a multi-day back-and-forth.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Manhattan homeowners through financing and rebate options where available before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services multi-zone commercial buildouts across Manhattan, with service agreements built around your operating hours.
Property managers working with multiple Manhattan locations can set up a standing account so every site gets consistent service history and pricing.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Manhattan households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
This is the standard every Manhattan technician on our team is held to.
If the same issue returns within the warranty period, we come back and fix it at no additional labor cost.
If a competitor's written quote for the same scope of work is genuinely lower, ask us about it.
A technician doesn't consider the job done until the system is tested and performing correctly.
A little attention to how your system is running can save you a lot of money and discomfort.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
This is one of the most common complaints we hear on service calls across Manhattan.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
We'll always tell you honestly when a repair is the better call versus when it isn't.
You'll know the cost before a wrench touches your system.
Because our trucks are stationed near Manhattan, we're rarely far from your address.
We don't consider a job finished until the system is actually performing correctly.
We run background checks because you're letting someone into your home.
Photos and plain-language notes accompany every diagnostic.
We'll walk you through what's actually available before you decide.
A snapshot of the feedback that keeps us accountable.
"The furnace stopped working overnight and someone was at our door before 9am. Fixed on the first visit and explained everything in terms I could actually understand."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. You can tell these guys actually know what they're doing."
"They handled the whole install in a single day, exactly like they said they would. Followed up a week later just to check everything was still running fine."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Kept our kitchen running through the weekend rush."
"The estimate matched the final invoice exactly, down to the dollar. My energy bill dropped noticeably the first month with the new system."
"Diagnosed a failed capacitor and had it swapped within the hour. This is the company I'm saving in my phone now."
Understanding what typically fails helps homeowners know what to watch for and when a repair call is worth making before things get worse.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Simple habits between professional visits also matter. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Whether your Manhattan home has a traditional split system, a ductless mini-split, a heat pump, or a hybrid dual-fuel setup, our crews are equipped to diagnose and repair it. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Every tech on our Manhattan roster goes through background checks, licensing verification, and ongoing manufacturer training.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Runs point on overnight and weekend emergency calls throughout Manhattan.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
We explain the diagnostic fee upfront and provide a flat-rate repair quote once the issue is identified.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
We never push a replacement when a straightforward repair will genuinely solve the problem.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
If you're unsure whether your address falls in our service area, a quick call to +1-866-805-8548 will confirm it.
Property managers and business owners can request a dedicated point of contact for ongoing service.
Yes, we service systems regardless of who originally installed them.
Financing options are available for qualifying replacement installations, and our team can walk you through what's currently offered.
Most Manhattan homes benefit from two tune-ups a year — one before cooling season and one before heating season.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
More involved repairs, like a coil replacement or a refrigerant leak repair, take longer and the tech will give you a realistic estimate before starting.
For commercial accounts or rental properties, a designated point of contact or property manager can coordinate access instead.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Manhattan.
A full system replacement is one of the bigger home expenses most people face, and we don't expect everyone to pay it in a single lump sum. If a rebate or local incentive program applies to your Manhattan installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
Coverage extends across Manhattan proper and into the nearby zip codes listed below.
Property managers with multiple Manhattan addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
